9
STEP 1
Attach your mounting clamp to any one
of the four mounting holes located on the
sides and bottom of the fixture.
**PLEASE NOTE: Your mounting clamp
may differ from the one used in our
installation instructions. Make sure to
refer to your clamp’s specific mounting
instructions for proper use.
MOUNTING
Please follow the directions below for safely hanging the RF WEDGE on a truss. You will
need an adjustable wrench and pliers. Please use a safety cable when hanging the fixture.
This will prevent any injuries in the event that the fixture falls.
STEP 2
Attach the clamp to a truss. Adjust the
angle (A) and direction (B) as needed.
Next, tighten the wing nut (C).
A
B
C
Summary of Contents for RF WEDGE
Page 13: ...13...
