Rockville RF WEDGE, Owner'S Manual

Page: 3 / 14

3
IMPORTANT SAFETY INSTRUCTIONS
• To reduce risk of electric shock, never open the unit. There are no user serviceable
parts; refer service to the Rockville service center.
• Avoid looking directly into the lights.
• Do not expose this unit to any kind of moisture.
• This device has an IP20 rating and is intended for indoor use only.
• Maximum operating temperature is 104°F (40°C).
• Do not operate this unit when the cover is open.
• Do not attempt to operate this unit if the power cord has been frayed or broken.
• Do not attempt to break off or remove the ground prong. This prong is used to reduce
the risk of electrical shock and fire in case of an internal short.
• Never plug this unit into a dimmer pack.
• Do not operate this unit if it is damaged.
• This unit is intended for indoor use only.
• Always mount this unit in a safe and stable manner.
• Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to the point
of exit from the unit.
• To avoid unnecessary wear and to improve the unit’s lifespan, unplug the unit when not
in use for extended periods of time.
ATTENTION
Please charge fixture for 10 hours before initial use.
To charge the light: plug in the power cord and turn off the power switch.
The power LED indicator will remain red while charging and will turn green
once the unit is fully chared.
Always charge your light for 8 – 10 hours.
This will help extend the battery’s life span.