18
STEERING WHEEL CONTROL SET-UP
Perform the following steps to set up the steering wheel controls:
1. There are 2 wires for the steering wheel control: Steering Wheel 1 – brown/black
and Steering Wheel 2 – yellow/ black. If the car has two wires from the steering
wheel, they can be connected to Steering Wheel 1 and Steering Wheel 2 random-
ly. If the car has only one wire from the steering wheel, it can be connected with
either Steering Wheel 1 or Steering Wheel 2, just be sure to not connect to both
at once.
2. In the system settings find the Steering Wheel Controls interface (see page 16).
3. Press the “Study” tab to enter into set up mode. If any of the function buttons
are white, this means that the system has been previously paired. To clear any
previous pairings, first press the button and then the button.
4. Now press and hold the desired function button on the steering wheel and then
press the corresponding function button on the screen. For example, if you press
and hold the “Mode” button on the steering wheel, press the “Mode” button on
the screen. Once the button is programmed, it will turn white. Repeat this process
until all the buttons have been programmed.
