When setting up for larger venues, a mixing console becomes a critical piece of equip-
ment for appropriately mixing signals from multiple inputs such as singers, speakers,
effects devices, musicians and of course allows for multiple speaker utilization.
To connect a mixing console begin by.
1. Make sure the RAM BT unit’s power switches are in the OFF position.
2. Turn Master Volume to 0 position (both units).
3. Turn Mic Volume to 0 position (both units).
4. Connect the LEFT OUTPUT of mixer to the Mic In connection of your Left
RAM BT unit.
5. Connect the RIGHT OUTPUT of mixer to the Mic In connection of your Right
RAM BT unit.
6. Switch ON your RAM BT units.
7. Slowly raise the level of the mixer output to the 0dB level position.
8. Slowly turn Mic Volume clockwise until you achieve appropriate volume setting. Proper
function is achieved when you hear audible distortion. The above adjustment matched the
mixer preamp to the input volume of the RAM BT units.
9. Turn Master Volume up to achieve proper volume (both units).
Public Address / Concert Mixer Setup
OFF
1
POWER
6
4
5
LEFT UNIT
RIGHT UNIT
7
ON
POWER
3
8
2
9
