3. Pull the compartment out.
4. Remove the old fuse and replace with the
spare fuse (located in the fuse compartment).
5. Always be sure to replace old fuse with the
same type of fuse.
1. Unplug your RAM BT unit.
2. Using a small flat head screw driver,
carefully remove the fuse compartment.
UNIT FAILS TO POWER UP.
1. Make sure unit is plugged in properly to wall outlet.
2. Check that power cable is plugged in tightly to unit.
3. If people or equipment tend to step and roll over or stretch your power cable it can
get damaged. Always try a second cable to test for shorts in original cable. Dispose of
original damaged power cables immediately.
4. If system still fails to light, UNPLUG FROM WALL. There is a small door above the
plug input on the RAM BT unit, pop off this door and remove the fuse with needle nose
pliers and replace with same rated fuse. Please make sure unit is unplugged from wall
before attempting to change the fuse!
UNIT TURNS ON, BUT NO SOUND.
1. Check that Master Volume is turned up.
2. Be sure your microphone is turned on.
3. All appropriate cables should be plugged in correctly.
4. If using a mixing console make sure fader and balance are set to center positions and
level increased.
5. Be sure Volume of appropriate channels are set above 0 level and matched correctly
as indicated above.
Fuse replacement Diagram
Trouble Shooting
OLD FUSE
SPARE FUSE
