Rockville Power GIG RPG-082K, Owner'S Manual

Page: 7 / 16

7
You can use the AUX 1 input when you wish to hook up an additional stereo signal source
without the use of a mixer console. CD players, DVD music players, MP3 players etc. can
be plugged directly in to the RCA jacks labeled AUX 1.
1. Switch OFF your RPG.
2. Connect the stereo signal source to the RCA jacks marked AUX 1.
3. Switch ON your RPG.
4. Refer to the “Setting Level Controls” section of this manual for instructions on how to
properly adjust the input volume (gains).
2. Connect the music source to the combo XLR/ ¼˝ TRS input labeled LINE IN using an
XLR or ¼˝ TRS cable.
3. Switch ON your RPG.
4. Refer to the “Setting Level Controls” section of this manual for instructions on how to
properly adjust the input volume (gains).
Aux Input
To connect your iPod, iPhone, MP3 player, Android phone or any other Bluetooth capable
device follow the steps listed below.
1. Switch ON your RPG and press the INPUT STAND BY button to select BT mode. The
BT indicator LED will flash intermitently.
2. Turn on the Bluetooth feature on your device and ensure that it is discoverable.
3. Look for "RPG082K" on the list of available devices and select it.
4. Once paired, you will hear a tone and the BT indicator LED will remain illuminated.
The RPG unit will remember the last paired device. When the unit is in BT mode and
the device is nearby, it will connect to it automaticaly.
5. If you have problems pairing your device please check the troubleshooting guide.
Bluetooth Pairing
ON
POWER
For USB/SD playback insert an SD card or USB flash drive. The USB/SD LED indicator will
illuminate and the unit will automatically begin playback. Please note, when an SD card or
USB flash drive is inserted, it will override all other input modes. If you switch to another
mode and wish to return to USB/SD mode, simply press the INPUT STAND BY button until
the USB/SD LED is illuminated.
USB/SD Input
1 2