Rockville Power GIG RPG-082K, Owner'S Manual

Page: 4 / 16

4
Mounting the Speaker
1. Unpack the speakers from their packaging. Check for any visible damage.
2. Carefully lift the speaker above the stand, lining up the extension pole with the
mounting hole at the bottom of the speaker (fig. h). This step may require a second
person for assistance.
3. Once the speaker is mounted on the stand, secure it by tightening the locking
knob located behind the pole opening at the bottom the speaker (fig. i).
Stands
1. Remove the stands from their packaging and examine them to ensure that they are in
proper working order.
2. Loosen up the adjustment knob (fig. a) and spread the legs to the desired width
(fig. b). We recommend spreading the legs to the point that the support bars are par-
allel with the floor. Re-tighten the leg adjustment knob so that the legs are securely
positioned (fig. c). Do not overtighten.
3. Loosen the stand extension by loosening the locking knob (fig. d). Lift the exten-
sion to the desired height (fig. e). Now insert the safety detent pin (fig. f). Make sure
the pin goes all the way through the extension pole (fig. g). If you retighten the locking
knob, do not overtighten it.
Assembling Your Power Gig Professional Sound System
RPG122K shown for display purposes. Actual equipment (speakers/stands) may differ slightly.
fig. d fig. e fig. f fig. g
fig. a fig. b fig. c