background image

NOTE: IT IS VERY IMPORTANT THAT YOU READ THIS SECTION TO PROVIDE
YEARS OF TROUBLE FREE USE. THIS UNIT REQUIRES CAREFUL HANDLING.

• All warnings on this equipment and in the operating instructions should be

adhered to and all operating instructions should be followed.

• Do not use this equipment near water. Care should be taken so that

objects do not fall and liquids are not spilled into the unit through any
openings.

• The power cord should be unplugged from the outlet when left unused for

a long period of time.

• Do not block any ventilation openings (if applicable).  Install in accordance

with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves

or other apparatus (including amplifiers) that produce heat.

• Only used attachments/accessories specified by the manufacturer.

• Do not use this product with any case, stand tripod, bracket or table that is

not specified by the manufacturer.  Insure that the case, stand, tripod,
bracket etc. is properly adjusted and setup (follow all instructions).  Extra
care and caution should be taken to avoid tip over and injury.

• Unplug this apparatus during lightning storms or when unused during long

periods of time.

Refer all service to qualified service personnel.  Servicing is required when the apparatus has been
damaged in any way, such as power supply or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus or if the apparatus has been exposed to rain or moisture, does not operate
normally or has been dropped.

DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT.  THIS EQUIPMENT
SHOULD BE SERVICED BY QUALIFIED PERSONNEL ONLY.  DO NOT MAKE
ANY INTERNAL ADJUSTMENTS OR ADDITIONS TO THIS EQUIPMENT AT
ANY TIME.  DO NOT TAMPER WITH INTERNAL ELECTRONIC
COMPONENTS AT ANY TIME. FAILURE TO FOLLOW THESE INSTRUCTIONS
MAY VOID THE WARRANTY OF THIS EQUIPMENT, AS WELL AS CAUSING
SHOCK HAZARD.

OPERATING TEMPERATURE

Do not expose this unit to excessive heat.  This unit is designed to operate between 32° F
and 104° F (0° C and 40° C).  This unit may not function properly under extreme
temperatures.

Precautions

Summary of Contents for Velocity V50D










Reviews: