Your VALVESONIC Plexi has been tested and complies with the following Standards and Direc-
tives as set forth by the European Union:
Council Directive(s):
2014/30/EU
Standard(s):
EN55032, EN55103-2
This means that this product has been designed to meet stringent guidelines on how much RF
energy it can emit, and that it should be immune from other sources of interference when properly
used. Improper use of this equipment could result in increased RF emissions, which may or may
not interfere with other electronic products.
To insure against this possibility, always use good shielded cables for all audio input and output
connections. Also, bundle audio cables separately from the AC power cables. These steps will help
insure compliance with the Directive(s).
For more information about other Rocktron products, please see your local dealer or one of our
importers closest to you (listed on the enclosed warranty sheet).
Imput Impedance
Input Jack
Output Impedance
Output Jack
Tube Type
Power Consumption
Power Requirements
Dimensions
Weight
1
㏁
1/4” mono unbalanced (Front and Rear)
Less than 50
㏀
(Line Output)
Less than 2.7
㏀
(Instrument Output)
1/4 Mono Unbalanced (Line Out and Instrument Out)
12AX7EH
20 Watts
100 ~120VAC / 1.0A
220 ~ 240VAC / 0.5A
(W) 19” x (D) 6 1/2” x (H) 1 3/4”
(W) 482.6mm x (D)165.1 mm x (H) 44.5mm
5.511 (lbs)
2.5K (kg)
SPECIFICATIONS
Summary of Contents for Valve Sonic Plexi
Page 1: ...U S E R S M A N U A L...
Page 9: ...Connection 1...
Page 10: ...Connection 2...
Page 11: ...Connection 3...