background image

Specifications

How to change the battery:

Maximum Input

Maximum Output

Imput Impedance

Output Impedance

Current Consumption

Power Requirements

Dimensions

Weight

8dBu

9dBu

1MΩ

100k

10mA

9V Alkaline Battery or 

Rocktron DC OnTap 

Univeral Power Supply 

(sold seperately)

95mm x 122mm x 56mm

3.75” x 4.75” x 2.25”

420g

14.81 oz

To change the battery, turn the pedal over and remove the 4 screws on the 

bottom.  Remove the back cover.  Carefully remove the old battery and 

replace it with a new 9V Alkaline battery.  Replace battery in the same 

area as the old battery was located.  Place the back cover on the pedal and 

re-insert the screws.  

Save yourself tons of money in batteries by using the Rocktron DC OnTap 

Universal Power Supply to power this pedal (sold seperately).  The Rocktron 

DC OnTap provides a constant flow of power to the pedal, unlike a battery 

that will degrade over time.  The Rocktron DC OnTap Univeral Power 

Supply can also power up to 20 pedals and can be used with both 110V and 

220V power sources.  

Check, www.rocktron.com for more information on the DC OnTap and 

where to purchase.

Summary of Contents for Valve Charger










Reviews: