Rocktron TABOO TWIN User Manual Download Page 9

Page: 9 / 75

Dual function controls

The function of each of these controls is dependent upon the current status of the
M

ENU

button. The upper label denotes the function of the control when Menu mode is

active, while the lower label denotes the function of the control in Instant Access mode.

ARAMETER

DJUST

/ E

FFECT

EVEL

control

When Menu mode is active (i.e., the M

ENU

button is lit), this control is used to adjust a

displayed parameter value.

When the active edit mode is Instant Access (i.e., the M

ENU

button is not lit), this

control is used to determine the level of the chorus, phaser, tremolo, wah, flange or pitch
effect (whichever is currently active).

ARAMETER

ELECT

/ D

ELAY

EVEL

control

When the M

ENU

button is lit, this control is used to scroll through the available

parameters under the current function heading.

When in the Title Edit function, this control is used to scroll through the available
character locations to be edited.

When the M

ENU

button is not lit, this control is used to determine the overall delay

level for the current preset. Turning this control will automatically display the Delay
Level parameter.

UNCTION

ELECT

/ R

EVERB

EVEL

control

In Menu mode, this control is used to access each of the primary functions of the
Taboo Twin. These functions include:

Global

Pre EQ

Phaser

Delay

Footswitch

Mixer

Post EQ

Flanger

Reverb

Program Changes

High Gain

Compressor

Tremolo

MIDI Channels

Controller Assign

Low Gain

Pitch Shift

Title Edit

MIDI Dump/Load HUSH

Wah-Wah

Chorus

Factory Restore

Once a function has been selected, the parameters for the function are accessible via
the P

ARAMETER

ELECT

control.

When the M

ENU

button is not lit, this control is used to determine the overall reverb

level for the current preset. Turning this control will automatically display the Reverb
Level parameter.

When a parameter value
has been altered from its

original value, the S

TORE

button will light to indicate

that the preset has

changed. The S

TORE

button

will then stay lit until either

the altered preset is stored,

a new preset is selected, or

all parameters for the

current preset are returned

to their original values.

Summary of Contents for TABOO TWIN












































































Search results

Summary of Contents for TABOO TWIN

Reviews:

Related manuals for TABOO TWIN

Brands by name

Popular brands

Rocktron TABOO TWIN, User Manual

Search results

Summary of Contents for TABOO TWIN

Reviews:

Related manuals for TABOO TWIN

Brands by name

Popular brands