Rocktron Taboo ARTIST, User Manual, Page: 39 / 79

3 5
CHORUS Function
The CHORUS function is available in configurations displaying “CRS” in the configuration title.
The Chorus effect in the Artist is produced by using two delayed signals (Voice 1 and Voice 2), detuning these delayed
signals (slightly changing their pitch), then modulating the detune effect so that the amount of pitch detune is constantly
varying. Using different detune amounts, modulation rates, modulation depths and pan settings for each delayed signal will
produce a greater perceived spaciousness.
Chorus parameters
D
ESCRIPTION
The CHORUS I/O parameter determines whether the Chorus is active or bypassed for the current preset.
The LEVEL parameters determine the volume of Voice 1 and Voice 2 relative to each other. The DIR/EFF
MIX parameter in the Mixer function also determines the Chorus level.
The PAN parameters allow for Voice 1 and Voice 2 to be panned to the left or right channel.
The DEPTH parameters adjust the amount of modulation of the Voice 1 and Voice 2 signals. A lower depth
setting will produce a more subtle detune effect, while a higher setting results in a more extreme detuning.
The RATE parameters determine the sweep speed (or the speed at which each voice is modulated). Lower
parameter settings result in slower speeds, while higher settings result in faster speeds.
The DELAY parameters allows you to select the minimum delay time (in milliseconds) for each voice. This
delayed signal is detuned and modulated to produce the chorus effect. Shorter delay times will result in a
tighter sounding chorused signal, while longer delay times will produce a larger ambient effect.
P
ARAMETERS
CHORUS I/O
LEVEL 1 / LEVEL 2
PAN 1 / PAN 2
DEPTH 1 / DEPTH 2
RATE 1 / RATE 2
DELAY 1 / DELAY 2
chorus