Rocktron Cyborg, Operation Manual

Page: 7 / 24

PRESET/HUSH Threshold Knob - this control knob has two functions.
1) This knob allows you to select the “preset” you desire. Eight presets are
available with this control. As the knob is turned the LED under the selected
preset will light.
2) When the “Second Function” Switch is engaged (see point 8) this knob al-
lows you to adjust the HUSH Threshold of each preset (see section on built in
HUSH Noise Reduction for more information).
LED Display - see following page for detailed descriptions of display.
TYPE/BASS Knob - this knob has two functions
1) Allows you to select the desired “Distortion Type” for each preset. As you
turn the knob you will note that the LEDs in the LED display will light in order
from left to right with the following types:
Edgy Coils - (Great Single Coil Distortion)
Dirty - (Dirty Distortion)
Austin - (Famous Texas Distortion)
Crunch - (Kickin Bluesy Distortion)
Corrosive - (Hard edge Grind Distortion)
Stack - (Huge Amp Stack Distortion Tone)
Rectified - (Modern Heavy Distortion)
Armageddon - (Heavy Metal Distortion)
2) When the “Second Function” switch is engaged (see point 8) this knob allows
you to adjust the BASS frequencies of the Distortion Type selected.
1
2
3
Descriptions