Rocktron Cyborg, Operation Manual

Page: 10 / 24

SOLO/STORE - PRESET SELECT SWITCH and STORE LED - this
switch has three functions:
o SOLO Mode - Each preset of the Cyborg Distortion has two
modes, Crunch mode and Solo Mode. When you turn ON the Cyborg Distor-
tion (Point 9) it is in Crunch mode and to access the Solo Mode you press this
switch. When Solo Mode is engaged the Store LED is lit.
Note, however, that all presets on the Cyborg Distortion can be overwritten. If you want to make the
Crunch preset a heavy solo preset and the Solo preset a very soft distortion you can do that by saving the
presets you like. [ Please read STORE Mode for more details. ]
Important note: Before you can STORE any changes the 2ND FUNCTION/STORE switch must be to
the right. The led display will have a vibrating appearance when 2nd Function mode is active.
o STORE Mode - Use this function to STORE (or save) changes
you have made to a preset. To operate the STORE function, press and hold
the SOLO/STORE switch down for 2 seconds. The leds will stop vibrating
and the SOLO LED will blink to indicate success. After this the display will
return to 2nd Function status as the leds will be vibrating.
o PRESET SELECT - Use this function to select a desired preset. To
enter the PRESET SELECT mode:
1. Press and hold the ON/OFF switch (Point 9) down for 2 seconds, the LED
above the SOLO/STORE switch will blink indicating you are in PRESET
SELECT MODE.
2. Now use the SOLO/STORE PRESET SELECT switch to select the desired
preset. You will note that the presets scroll from 1 through 8 in sequence and
then back to 1 again on the LED Display (Point 2).
N
ote that at this point the desired preset LED is now blinking along with the ON/OFF led indicating
waiting to recall status. To RECALL the desired preset you press the blinking ON/OFF switch All leds
will stop blinking and the desired preset will be active.
10
Descriptions
Continued