63
Air Can Installation
5 0 / 2 0 0 H o u r S e r v i c e
A i r C a n I n s t a l l a t i o n
If removed during disassemby, install the negative volume Token.
If removed during disassemby, install the negative volume Token.
Align the flat inner sections of the negative volume Token with the flat
Align the flat inner sections of the negative volume Token with the flat
outer sections of the seal head / air piston. Snap the negative volume
outer sections of the seal head / air piston. Snap the negative volume
Token onto the seal head / air piston.
Token onto the seal head / air piston.
Clamp the shaft eyelet into a vise, with the shock positioned
Clamp the shaft eyelet into a vise, with the shock positioned
horizontally, and slightly downward.
horizontally, and slightly downward.
Install the Counter Measure assembly onto the damper body. Slide it to
Install the Counter Measure assembly onto the damper body. Slide it to
the seal head / air piston.
the seal head / air piston.
Apply grease to the seal head / air piston seals.
Apply grease to the seal head / air piston seals.
Tilt the air can and inject 1 mL of Maxima Extra 15w50 Suspension Oil
Tilt the air can and inject 1 mL of Maxima Extra 15w50 Suspension Oil
(or half of included pillow pack) into the air can (negative air spring
(or half of included pillow pack) into the air can (negative air spring
chamber).
chamber).
Rotate the air can and allow the oil to spread evenly around the inner
Rotate the air can and allow the oil to spread evenly around the inner
surface of the air can. The oil should pool at the narrow end of the air
surface of the air can. The oil should pool at the narrow end of the air
can at the inner seals and dust wiper seal.
can at the inner seals and dust wiper seal.
1
2
Bench vise and soft jaws
3
Grease
4
15w50
1 mL
