45
Lower Leg Installation
Apply a small amount of grease to the end of the rebound adjuster hex
and around the outside of the damper bottom bolt. Install the rebound
adjuster knob onto the rebound damper bottom bolt.
Press the knob firmly onto the bolt until it clicks into place.
Refer to your pre-service recorded rebound setting to adjust the
rebound damping.
Refer to your pre-service recorded settings, or use the air chart on the
fork's lower leg, and pressurize the air spring.
You may see a drop in the indicated air pressure on the pump gauge
while filling the air spring; this is normal. Continue to fill the air spring to
the recommended air pressure.
Compressing the fork will equalize the positive and negative air
chambers. After the fork is cycled 3-4 times, check the pressure and
add air as needed.
Install the air valve cap.
Clean the entire fork.
This concludes the service of your RockShox® suspension fork.
8
9
Shock pump
10