17
Air Spring Service
A i r S p r i n g S e r v i c e
2 0 0 H o u r S e r v i c e
A i r S p r i n g R e m o v a l
⚠
WARNING- EYE HAZARD
Verify all pressure is removed from the fork before proceeding. Depress the Schrader valve again to remove any remaining air pressure. Failure to
do so can result in injury and/or damage to the fork.
Remove the air spring top cap.
Clean the upper tube threads.
Remove the top cap o-ring and discard it.
Apply grease to a new o-ring and install it.
Push the air shaft into the upper tube.
Push the seal head tab (A) into the upper tube and under the
retaining ring.
NOTICE
Do not scratch the air spring shaft. Scratches on the air shaft will allow
air to bypass the seal head into the lower leg, resulting in reduced
spring performance.
1 1
24 mm
2
3
Flat blade screwdriver
A