Rocks OK-03.4310, Manual, Page: 9 / 32

9
Removing the battery:
1. Press the lock button
2. Pull out the battery
DEVICE
The battery must be disconnected from the tool when preparing the tool for work, when installing
and changing accessories. The tool should be kept clean, especially in technically important places:
switches, switches, connection with the battery, accessories holder, housing around the engine,
ventilation openings. Contamination of these places can lead to permanent damage to the tool.
Clean tools with a clean, damp cloth and blow with air.
The work procedure is as follows.
Fastening the saw blade with the QUICK LOCK system
Thrust foot adjustment
Turning on the saw
• Press the main switch - the saw will start to work
• You can lock the switch for more comfortable work. With the saw on, additionally press
the lock button (3) and release the switch. The saw will continue to work.
• To turn off the saw - press again and release the main switch (4)
Cutting rules:
• The material to be cut must be very firmly attached to prevent it from vibrating
• Cut close to the attachment point
• Use a vice and clamps to fix the wood to the work table
The saw has the following functions:
SOFT START - i.e. slow start. This feature extends the life of the engine.
QUICK LOCK - fast and safe way to fix the saw blade
1. Turn the clamping head counterclockwise
2. Insert the saw blade into the head
3. Turn the clamping head clockwise until it clicks
4. Check if it is mounted correctly
1. Move the foot adjustment lever down
2. Extend the support foot to the correct depth
and angle
3. Lock the lever