Rocks OK-03.4310, Manual, Page: 8 / 32

9
8
CONSTRUCTION & TECHNICAL DATA
Voltage DC 18 V
Saw blade 150 mm
Rotation speed 3000 rpm
Vibrations 8,3 m/s²
Power and sound pressure 92 / 81dB
Weight 2,5 kg
Additional equipment (only in OK-03.4311)
Battery
4 Ah
Charger 21 V / 5 Ah
Charging time 2 h
USER MANUAL
BATTERY
Always fully charge the battery before using it for the first time. The battery will warm up while
charging, this is normal. Remember the battery is an consumable part that is subject to natural wear.
When it is worn out, replace it with a new one. The battery has overload safety systems that protect
the device and will work if the device is overloaded and overheated. You should then wait about 30
minutes for the device and the battery to cool down. However, in some cases, the battery may be
permanently damaged. In such cases, the battery should be replaced with a new one. In the event
of damage related to overload, the battery is not subject to complaint. Charge the battery regularly,
at least once every 3 months. Even if the device is not in use. Discontinue use of the device if the
battery is discharged and the device stops while operating. Do not turn it on again, just replace or
recharge the battery immediately. An attempt to operate with a discharged battery may lead to
permanent damage to the battery.
1.
2. 3.
4.
5.
7.
6.
8. 9.
1. Thrust foot
2. QUICK LOCK fastening
3. Switch lock button
4. Main switch
5. Handle 6. Battery clamping button
7. Battery
8. Front handle
9. Thrust foot adjustment lever
10. Wood saw blade
10.