8
the charger indicator is on)
Low water flow
Blocking of the filter
Clean the filter and water inlet
filter
Water inlet pipe is folded
Unfold or replace the water pipe
Impurities in water
Change it into clean water
Blocking of the jet pipe
Clean the jet pipe
No water suction
Wrong connection of the water
pipe connector and water inlet
Connect the inlet pipe connector
to the machine water inlet in
place
The water pipe filter is not fully
inserted into the water
Insert the water pipe filter fully
into the water
The water inlet seal ring is off
or damaged
Install or replace the seal ring
Long waiting time for water
coming out
The cleaner is on Eco mode
Switch to Auto mode
Low water flow
Refer to the solution of low
water flow
Leakage of water outlet
Jet pipe or extension pipe is not
installed in place
Install the jet pipe with
extension pipe or the cleaner
host in place
Note: If there is other trouble,special tools should be used meanwhile the maintenance must
be implemented by professional specialists from the manufacturer, its maintenance or similar
departments to avoid danger.
Product specification
Technical data
Product model
LDG-HERO-H4
Charger Voltage/Frequency
110~240V 50/60Hz
Charging Current
500~1000mA
Charging Time
3~5 hours
Rated Voltage
40V Max
Rated Pressure
Auto Mode
3.5 MPa (507.5Psi)
Eco Mode
2.2 MPa (319Psi)
Max Pressure
6.0 MPa (870Psi)
Rated Flow
Auto Mode
150 L/h (0.66GPM)
Eco Mode
120 L/h (0.53GPM)
Max Flow
200 L/h (0.88GPM)
Maximum Water Inlet Pressure
0.7 MPa (101.5Psi)
Height of Water Suction
Max 1.2 Meter