background image

Copyright 2021. All rights reserved by Rockmore International.

 

 

 
 
 

6.  SAFETY:

 

 
The percussive hammer drilling environment poses many opportunities for injury for the careless and 
unprepared.  Be sure to work safely at all times.  Rotating equipment can entangle loose clothing.  Loud 
noises accompany the hammer operation and high-pressure air can throw dust and debris.  Protect your 
sight and hearing with appropriate safety equipment.  Keep your hands and feet clear of the borehole at 
all times.  Keep fingers from getting trapped between the hammer and the bit.

  

 
 

7.  WARRANTY: 

 
ROCKMORE guarantees all ROK LT Series Hammers and spare parts to be free of raw material and 
manufacturing defects.  Warranty coverage is valid for six months after date of shipment.   
 
In order to be eligible for warranty service, you must first file a claim and obtain a Returned Goods 
Authorization number, authorizing you to return the goods to our facility.  All goods returned to us, either 
new or used must be returned prepaid freight.  Please contact your local salesman or the appropriate 
office directly for more information.   
 
ROCKMORE reserves the right to refuse claims associated with the following problems:  
 

 

Damage caused by applying excessive force to any components of the hammer 

 

The use of non-original ROCKMORE hammer parts 

 

Any attempt to physically alter any components of the hammer, in particular but not limited to 
the application of heat or weld 

 

Failure to follow recommended operating and maintenance procedures (i.e. lubrication, 
contamination, corrosion) 

 

Failures due to abuse, misuse, careless maintenance and repairs  

 

Common wear and tear during normal drilling procedures 

 
The recommended maximum operating air pressure level for our ROK LT Series hammers is 145 PSI 
(10.0 Bar).  Do not operate the ROK LT Series Hammers above this level.

   

 
 

Liability 

 
ROCKMORE shall not be liable for any claims that occur from personal injury due to negligent procedures, 
handling, operation, and/or maintenance of ROCKMORE DTH hammers and bits.  ROCKMORE will 
decline any liability for failure to disregard recommended health and safety measures, i.e. protective eye 
wear and clothing, safety glasses, etc.  

 

Summary of Contents for ROK 20LT Series









Reviews: