4
Distributed by Rockler Companies, Inc.
Medina, MN 55340
44127
Rev 12/18
Check Rockler.com for updates. If you have further questions, please
contact our Technical Support Department at 1-800-260-9663
Assembly
1. Use a pen press or a clamp to press the Cap/Clip (1) into
the top end of the Upper Tube (2). Keep in mind that the
top end was next to the outer bushing when the blanks
were on the lathe.
2. Press the Center Band Coupler (3) , sleeve end first, into the
bottom end of the Upper Tube (2). (The bottom end of the
Upper Tube was toward the center when the blanks
were on the lathe.)
3. Press the Tip (7) into the bottom end of the Lower
Tube (6) (which was next to the other outer bushing
on the lathe).
4. Press the non-threaded end of the Twist Mechanism
Coupler (5) into the other end of the Lower Tube (6).
5. Slide the Spring (9) over the writing tip of the Ink
Cartridge (8) and insert both through the Twist Mechanism
Coupler (5) and into the Lower Tube (6).
6. Thread the Twist Mechanism (4) onto the Twist Mechanism
Coupler (5). If the writing tip has been exposed, turn the Twist
Mechanism Coupler (5) to retract it.
7. Align the grain of the two pen sections and press them
together until the Center Band Coupler (3) is tight against the
Twist Mechanism Coupler (5).
Stock #
Pro Pen Turning Mandrel, #2 Morse Taper
49514
Pro Pen Turning Mandrel, #1 Morse Taper
44309
Adjustable Pen Turning Mandrel, #2 Morse Taper
48377
Adjustable Pen Turning Mandrel, #1 Morse Taper
44341
Fisch 10mm HSS M2 Pen Drill Bit
37216
Cuban Pen Bushings
54645
Barrel Cleaner/Pen Mill Kit
47526
OPTIONAL ACCESSORIES
1 Cap/Clip
2 Upper Tube
3 Center Band Coupler
4 Twist Mechanism
5 Twist Mechanism Coupler
6 Lower Tube
7 Tip
8 Ink Cartridge
9 Spring
PARTS LIST
1
2
3
7
6
5
4
8
9
