3
PRODUCT SPECIFIC SAFETY WARNINGS
> Unplug all tools to be connected with the Dust Collection
Grounding Kit before beginning installation.
> If multiple machines are connected to your dust collection
system, it is recommended that you run a wire from each
machine to the ductwork junction and then connect it to
the wire leading to the dust collector.
> Each piece of power equipment, including the dust
collector, must be properly grounded via a three-prong
plug for this system to be effective.
> Each piece of wire ending at a machine must be secured
to bare metal on the frame of the machine. There must be
metal-to-metal contact for the system to function.
> When drilling holes for grounding screws in the metal
frames of machines, carefully position the holes and take
care not to drill into any internal parts of the machines.
Failure to exercise care could result in damage
to the machines.
> Recommended for use only with permanently
installed ductwork.
> If, after reading these instructions, you are unsure that you
can install the grounding system properly, please contact a
licensed electrician.
Quantity
1 Copper Wire, 50'
1
2 Grounding Screws
2
3 3/32" Drill Bit
1
4 Ring Terminal
2
5 Twist-on Wire Connectors
5
PARTS LIST
5
1
3
2
2
4
4
