background image

  

11

Check Rockler.com for updates. If you have further questions, please

contact our Technical Support Department at 1-800-260-9663  

or [email protected]

>

  To avoid pinching or crushing your fingers, 

  keep your hands away from the areas 

  where the legs cross.

>

  To avoid pinching or crushing your fingers, 

  keep your hands away from the areas 

  where the legs cross.

Fig. 13

Fig. 14

 

3.  Holding the table on its side, carefully swing the legs flat to 

    the underside of the table.

 

4.  Carefully tilt the table so it’s facedown on a flat surface and 

    install both Locking Pins through both legs to secure the 

    legs in the closed position. 

Fig. 12.

Folding the Table in Wall-mounted Applications

 1.  Remove the router and baseplate from the Convertible 

    Benchtop Router Table. (The fence can remain on the 

    table; just make sure the knobs are tightened securely.)

 

2.  Hold the inner legs in position and carefully remove the 

    Locking Pins securing the Feet (3) to the crossbar. 

Fig. 13.

 

3.  Holding the tabletop securely, pull the Feet (3) off the 

    crossbar and slowly allow the table to tilt downward 

    until it comes to a stop. 

Fig. 14.

 

Summary of Contents for Convertible Benchtop













Reviews: