Rockford Fosgate RFX9500DVD, Manual

Page: 8 / 15

EN-8
LISTENING TO RADIO
Band button (BD)
Each band is toggled cyclically by pressing this key FM1---FM2---FM3--AM1--AM2.
Automatic or Manual tuning (FREQ UP OR FREQ DOWN )
When pressed short, these keys are operated as SEEK tuning mode.
When pressed longer than 1 sec., they are operated as MANUAL tuning mode.
Note: Unit automatically switch back to SEEK tuning mode after few seconds if no tuning was perform
in MANUAL tuning mode.
Auto seek/Preset scan (A/PS)
Preset Scan (PS) - By pressing shortly, the radio plays each preset station for 5 seconds.
Auto Seek (AS) - By pressing longer than 1 sec, auto seek is activated. The 6 strongest stations are
preset and stored in the corresponding preset number. When Auto Seek operation is finished, the
radio executes the preset scan.
Note: This feature is called AMS on the remote control.
Scan automatic tuning control (SCAN)
This key is operated as RADIO SCAN. The operation is similar as normal search but different thing
is holding 5 seconds on every station detected.
Storing and recalling broadcast frequencies
If you press any of the NUMBER (1-6) you can easily store up to six broadcast frequencies for later
recall with the touch of a button.
1. Choose a desired BAND (FM1-FM2-FM3--MW1--MW2).
2. When you find a frequency that you want to store in memory, press a NUMBER (1-6) and hold until
the preset number shows and lit in the display.
3. The number you have pressed will remain lit. The selected radio station frequency has been stored
in memory. The next time you press the same NUMBER (1-6) the radio station frequency is recalled
from memory.
Note: Up to 18 FM and 12 MW stations can be stored in the memory.
Stereo/Mono
Remote Control: Press ST button to switch between stereo or mono sound.
LISTENING TO CD/MP3
Basic operation of CD/MP3
1. To perform fast forward or reverse, press and hold or . To resume normal playback at a
desired point, press .
2. To skip back or forward to another chapter, press or . Pressing skips to the start of
the next chapter. Pressing skips to the previous chapter.
3. To pause playback, press . Press it again to resume.
4. To stop playback, press .
Note:
• When MP3 disc is inserted, all track file names will be displayed on the TV screen with their
corresponding track number.
• You can use the navigation keypads on the remote control to access the file. To play selected file,
simply press enter.
Searching for particular track
During playback, you can simply press the corresponding track number using the number pad on the
remote control.
Note: • To select 3, press 3.
• To select 13, press 10+, 3.
• To select 23, press 10+, 10+, 3 in order.