background image

EN-15

RESET

TROUBLESHOOTING 

Can not read some USB devices

The unit is not 100% compatible with all USB devices or the USB device has special format.

Try to format the USB device in FAT 16/32 standard.

Can not play some iPod

Your model unit is not compatible with new iPod Photo.

Can not play the some songs download from website

The songs may be in iTune DRM (digital right management) format or the format is not supported 

by the current unit.

Unit takes about 60 seconds to recognize some USB device

It is normal. The unit sometimes takes longer time to read all the files inside the USB device.

LCD cant not display the MP3 song name correctly

The songs are in foreign language or not in ID Tag 3 format.

Power does not turn on (no sound)

Press “RESET” button (under the front panel)

Check the wire

Check the unit fuse. Replace new fuse if blown. If it happens again, 

consult the dealer.

No sound output when operating the unit with amplifiers or power antenna is attached

Power antenna lead is shorted to ground or excessive current is required for amplifiers or power 

antenna.

Button is not responsive or the LCD display is wrong

Press and hold the [RESET] button (located behind the front panel) for 2 seconds.

The connection pins for the front panel may be dirt. Use a soft cloth to clean its surface.

If it does not fix the problem, consult your dealer.

The unit picks up the engine noise

Check the ground wire

Turn off key beep sound

Press and hold the knob to access the setup mode.

The preset station memory is gone after battery change or discharge

It is normal. User has to re-program.

After turn the power on, the unit powers off immediately

The battery may be too low (The unit operating voltage is 11V to 16V). If the unit still cannot turn 

on, consult your dealer.

Summary of Contents for RFX9500DVD
















Reviews: