10
S
PECIFICATIONS
MODEL- PRIME
R150-2
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4
Load Per Channel
50 Watts x 2
2
Load Per Channel
75 Watts x 2
4
Load Bridged
150 Watts x 1
Dimensions:
Height
2.40" (6.10cm)
Width
7.67" (19.49cm)
Length
11.54" (29.30cm)
Amplifier Fuse Rating (Amp)
20A ATC
Battery Fuse Rating (Amp) External (Not Supplied)
20A
“A” Weighted Signal to Noise Ratio
Referenced to 1 Watt into 4 ohms
≥70 dB
“A” Weighted Signal to Noise Ratio
Referenced to rated output into 4 ohms
≥90 dB
Crossover Slope
12dB/octave Butterworth
Crossover Frequency
High Pass @ 80Hz, Low Pass variable from 50Hz to 250Hz
Frequency Response
20Hz to 20KHz ±1dB
Signal Voltage Adjustment Range
Variable from 150mV to 8V (RCA Input)
Protection
Short circuit protection shut downs the amplifier in
case of very low impedance or shorted speaker wires.
Punch Bass
Variable from 0dB to +12dB @ 45Hz
Input Impedance
20K ohms
Operating Voltage
9 to 16 Volts DC
Balanced Inputs
No
CMRR (Common Mode Rejection Ratio)
>40dB @ 1KHz
Damping Factor
>200
THD+N (Total Harmonic Dist Noise)
< 1.0% @ 4 ohm
These specifications are Amplifier Power Standard CEA-2006 Compliant
Specifications subject to change without notice
