9
0UZ[HSSH[PVU
NOTE: You can insert the one side of the speaker into the assembly
and use a flat bladed screwdriver or pry bar to gently pry the grille
onto the speaker for a tight fit. Be sure to orientate the speaker with
the terminals up.
Reattach the speaker and grille assembly to the fairing.
Step 4 - Amplifier Pre-Wire
All of the wiring harnesses are color coded for ease of installation.
NOTE: Due to the limited space available, be sure to connect all of
the wiring harnesses to the amplifier prior to mounting. It is also
recommended setting the Level at this time. The recommended
setting is -3dB.
Refer to wiring diagram on Page 6 for harness and wire
connections
Step 5 - Amplifier Mounting
Without Communication Module
Using the supplied Velcro pad, cut it in half and apply to the top of
the radio and the bottom of the amplifier. Be sure to clean the top
of the radio for proper adhesion.
NOTE: When applying the Velcro to the top of the radio, it needs to
be applied close to the gauge cluster side so the installed amplifier
provides adequate clearance for the fairing when reinstalled.
With Communication Module
Attach the Velcro on top of the communication module and to the
underside of the amplifier. Once the amplifier is mounted, you can
now wire up the speakers.
All manuals and user guides at all-guides.com
