14
All Models
Step 8 - Routing Power Harness
Pass the power harness through the fairing and route next to the
factory wiring harness.
Routing the new wire harness along with the factory harness is
recommended. Be sure to zip tie the harness together for a clean,
tight fit.
Step 9 -Gas Tank Console Removal
Remove the gas tank console so you can route the harness(s)
underneath of it. You will need to remove the gas cap, vent tube
and communication wires (if equipped).
The gas cap should not be left off. Once
the console is off put the cap back on to
prevent any gas fumes creating a potential
fire hazard.
Step 10 -Gas Tank Console Installation
Once all wires are routed down the top side of the tank, reinstall
the tank console. Remember to reconnect the vent line, the
communication wire and the gas cap.
Step 11 - Connect Battery
Connect the positive (+) and negative (-) wires to the battery. The
system is ready to test. Reinstall fairing and seat when system
check is completed.
0UZ[HSSH[PVU
All manuals and user guides at all-guides.com
all-guides.com
