9
O
PERATION
– B
ASIC
POWER ON/OFF
1. Press the POWER button to turn the source unit on.
2. Press and hold the POWER button to turn the source unit off.
NOTE
: After a CD has been played and ejected, press the POWER button once to return to TUNER
mode.
VOLUME KNOB – SEL/MODE CONTROLS
The Volume knob is a multifunction controller and handles the Volume and Tone Controls, see
below.
To Control Volume
1. Turn the VOLUME knob clockwise to raise volume.
2. Turn the VOLUME knob counter-clockwise to lower volume.
To Adjust Tone Controls
1. Press the VOLUME knob (SEL/MODE button) repeatedly to cycle through;
BASS – -12dB to +12dB {Default is Ø)
TREBLE (TREB) – -12dB to +12dB {Default is Ø)
FADER (FAD) – R +15 to F +15 {Default is Ø) R=Rear, L=Front
BALANCE (BAL) – L +15 to R +15 {Default is Ø) L=Left, R=Right
AUXILIARY LEVEL* – -6dB to +6dB {Default is Ø)
Allows you to boost the input volume of a weak external audio source or diminish a powerful
one. Useful for external sources: MP3 players, video games, VCPs, etc.
VOLUME – Ø-32 {Default is Ø)
2. Turn the VOLUME knob to increase (clockwise), or decrease (counter-clockwise), the selected
function.
NOTE
: If no adjustment is made after 5 seconds, the SEL/MODE knob will revert to VOLUME
mode.
Selecting Mode Options
1. Press and hold the VOLUME knob for about 2 seconds until the first Option appears
{LOCAL/DX}.
2. Press the VOLUME Knob repeatedly to cycle through all Setup Options. The first two (2)
options only affect the Tuner Mode.
3. To change an Option, turn the Volume Knob clockwise or counter-clockwise.
4. To store, wait 5 seconds and the Display will return to the last Mode shown.
•
LOCAL/DX — Adjusts the sensitivity of the tuner for rural conditions where there are weak radio
stations while Local adjusts the sensitivity for city conditions where there are several strong
radio stations. LOCAL will appear on the display when in that mode
•
ST/MONO (Stereo/Mono) — Changes the reception signal of the tuner from stereo to mono. ST
will appear on the display when in stereo mode, and MONO will appear when in mono mode.
•
ILLUMI (Illumination) — Changes the illumination of the source unit from green to red.
•
12H/24H (Hour) — Changes how time will be displayed between a 12 hour or 24 hour time
format. Example: when in 24H, 3pm will display as 15:00.
