10
O
PERATION
– B
ASIC
O
PERATION
– T
UNER
CLOCK OPERATION
NOTE: To set the clock, the source unit must be turned OFF.
Setting the Clock Hours
1. Press and hold the
CLK/A. MEM
button until the source unit turns on, the hour will be flashing.
2. Use the Volume control knob to adjust the hour.
Setting the Clock Minutes
1. Press the
CLK/A. MEM
button a second time and the minutes will flash.
2. Use the Volume control knob to adjust the minutes.
3. Press and hold the
CLK/A. MEM
button until the source unit turns back off. The time is now set
on the source unit.
AUXILIARY MODE (8520 Only)
1. Press and hold the
MUTE/AUX
button until A\AUX appears in the display.The external audio
source connecting into the AUX IN RCAs will be used. All controls, except those used for CD
play function normally in this mode.
2. Press the POWER button once to return to TUNER mode.
MUTE
1. Press the MUTE button to dampen the volume.
2. Press the MUTE button a second time to revert the audio to the previous level.
NOTE
: The panel will display MUTE until the function is canceled.
PANEL DISPLAY
Tuner Mode:
The panel will display the band, FM1, FM2, FM3, FM4, AM1 or AM2, and the station frequency.
CDP Modes
While playing a disc the panel will display DISC, TRACK, the track number and the time played.
AUX Mode {Model 8250 only}
The panel will display A\AUX when in Auxiliary mode.
SELECTING A BAND
Press the POWER/TUNER BAND button repeatedly to cycle through FM1, FM2, FM3, FM4, AM1
and AM2. The act of selecting the band automatically enables that band.
TUNER OPTIONS
DX and ST (Stereo) are the default Tuner Options settings.
•
LOCAL/DX
•
ST/MONO
Selecting Tuner Options
See
Selecting Mode Options
to change tuner options.
