RocketFish RF-ACRHB, User Manual

Page: 5 / 38

5 RF-ACRHB
Installing your USB hub
To connect your USB hub:
1 Plug the AC power cord into a power outlet, then plug
the other end into the power connector on your USB
hub.
2
Plug the A mini connector on the A-B mini USB cable into
a USB 2.0 port on your computer, then plug the B mini
connector into the upstream port on your USB hub.
Note:
If you use a USB 1.1 port on your computer, all devices
connected to your USB hub will run at the slower USB 1.1
speed.
3 Plug the USB cables from the USB devices into any of the
downstream ports.
Power connector Plug the AC power cord into this
connector and into a power outlet.
Note: If you do not connect your USB
hub to a power outlet, the devices you
connect may not work.
Power LED This LED lights red when your USB hub
is receiving power.
Component Description