_____________________________________________________________________________________________
© Rocket Milano s.r.l. - RE DOPPIA series. User Manual Ed. 01.2019. Specifications subject to change without notice. Page 19
The machine must be ready to operate.
Coffee portion settings: Please
operate on machine’s left side group (seen from
operator).
The coffee portion settings made on the left side group are automatically copied to all
the other groups of the machine. (You can, of course, do the coffee portion settings
also individually for each group).
Please do the coffee portion settings under operating conditions (with right quantity of
freshly and correctly ground coffee, correct tamping etc.).
How to proceed:
1.
Keep “P” key of left side group pressed until its LED is flashing.
When the
“P” key is flashing, the machine is in portion setting mode (for coffee
and hot water portion keys).
2.
Setting the automatic coffee portion keys (machine in portion setting mode).
Press the automatic coffee portion key you wish to set. The coffee will be
dispensed. (The
“P” key stops flashing for the time you dispense coffee and will
start flashing again once you stop dispensing). When the desired quantity of
coffee has been dispensed, press this key again. Coffee dispensing will stop. The
machine will remember the quantity of product dispensed and dispense the same
quantity of coffee each time you press this key.
Now repeat this procedure for the other coffee portion keys you wish to set.
3.
When the automatic coffee portion keys are set, proceed to set the automatic hot
water portion keys (machine always in portion setting mode, meaning, the
“P” key
is flashing).
Please note that hot water portion keys must be set individually for each group.
(The portions set on the left side group are NOT copied to the other groups).
Press the hot water key of the group you wish to set and press it again once the
desired quantity of hot water has been dispensed (=hot water portion for this key
is set).
Now move to the next group you wish to set the automatic hot water portion for
and repeat the same hot water portion setting procedure.
When you
’re done with setting coffee and hot water portions of your machine, press
“P” key three times to exit programming mode. You can also turn machine off and on
again to exit programming mode.
