17
R9V
4
- INSTALLATION
The Coffè machine is only to be installed
in locations where use and maintenance is
restricted to trained personnel.
The support surface shall be leveled, dry,
smooth, steady and stable and at such a
height that the cup-warming surface is at over
150 cm from ground. (fig._
4.1
)
Do not use or install where water jets are used.
fig_4.2
fig_4.1
In order to guarantee normal operation, the
machine must be installed in areas where the
environmental temperature is b6°C
and +36°C; and the humidity is not over 70%.
Please make sure that there is an open area
of at least
10 cm
on each side and behind the
machine to allow adequate ventilation and
facilitate its use and the performance of any
maintenance operations.
(fig._
4.2
)
MACHINE
UNDER
MAINTENANCE
i
If the machine is wet or very
damp, wait until it is completely
dry before installing or using it. It
is always necessary to request
an accurate control to qualified
service people in order to find
any possible damage to the elec-
tric components.
A grounds drawer should be fitted by the
installer.
Summary of Contents for R9V Series
Page 1: ...R9V EN PROFESSIONAL COFFEE MACHINE Use and maintenance manual Original instructions...
Page 2: ......
Page 38: ...R9V Note...
Page 39: ......