Chapter 10.
Recording Settings
62
the sound is recorded using:
MPEG v1 for 48, 44.1 and 32
MPEG v2 for 24, 22.05 and 16
Note:
You cannot change the sample rate for digital recordings.
b
10.3 Source
Choose the source of the recording. The options are:
SPDIF (digital)
,
Mic
, and
Line
In
.
10.4 Channels
This allows you to select mono or stereo recording. Please note that for mono recording,
only the left channel is recorded. Mono recordings are usually somewhat smaller than
stereo.
10.5 Independent Frames
The independent frames option tells the player to encode with the bit reservoir disabled,
so the frames are independent of each other. This makes a file easier to edit.
10.6 File Split Options
This sub menu contains options for file splitting, which can be used to split up long
recordings into manageable pieces. The splits are seamless (frame accurate), no audio is
lost at the split point. The break between recordings is only the time required to stop
and restart the recording, on the order of 2 – 4 seconds.
Split Measure:
This option controls wether to split the recording when the
Split File-
size
is reached or when the
Split Time
has elapsed.
What to do when Splitting:
This controls what will happend when the splitting con-
dition is fullfilled the two available options here are
Start a new file
or
Stop
recording
.
Split Time:
Set the time to record between each split, if time is used as
Split Measure
.
Options (hours:minutes between splits): Off, 00:05, 00:10, 00:15, 00:30, 1:00, 1:14
(74 minute CD), 1:20 (80 minute CD), 2:00, 4:00, 8:00, 10:00, 12:00, 18:00, 24:00.
Split Filesize:
Set the filesize to record between each split, if filesize is used as
Split
Measure
.
The Rockbox manual
Archos Recorder