Rock Solid Metered PDU Manual GS Geiger Group ∙ 181 Sand Creek Rd Ste I-1 ∙ Brentwood ∙ CA ∙ 94513 ∙ USA
9
5.8.
Checking and Changing the Mail Settings
When an event (example: crossing of threshold) occurs, the PDU can send out an email message to a pre-
defined email account. To configure the mail settings, do the following:
1.
From the main menu, click on the Email link.
2.
Enter Email Server. The Email Server is the proxy email server that will be used to send the email.
The Email Server cannot be an IP address only a hostname that is resolvable by the DNS servers
configured earlier is valid.
3.
Enter the Sender’s Email Address. This is the email address of the sender.
4.
Enter the Recipient’s Email Address. This is the destination email address.
5.
Click Apply. A confirmation dialog box will pop up, click OK to save the new values.
The message in the email will be formatted as follows:
Indicate OutletA~H-XXXXXXXX status in order
X=0 : means the power off.
X=1 : means the power on.
5.9.
Checking and Changing the SNMP Trap Parameters
When an event occurs, the PDU can send out trap message to pre-defined IP address. To configure the
SNMP settings, do the following:
1.
From the main menu, click on the SNMP link.
2.
Enter Receiver IP. The Receiver IP is the IP of the server that will receive the SNMP trap.
3.
Enter Write Community. Default Write Community is “public” and can be modified by user.
4.
Click Apply. A confirmation dialog box will pop up, click OK to save the new values.
Read Community is public and fixed.
Summary of Contents for RSM0-30AM-16N2
Page 12: ......