Rock Helmets Dynamo Ansi, Instructions Manual, Page: 8 / 12

8
Helmet for climbing and
mountaineering, work at height,
rescue.
CE EN 12492:2012
ANSI/ISEA Z89.1-2014, type 1 class C
Field of application
This helmet is specifically designed for
mountain climbing, rock climbing, rescue and
working at heights.
Instructions for use
This product is part of personal safety
equipment. Read the above documentation
carefully before using the product. Be careful
to read and observe the following instructions
for use. This product is specifically designed
for mountain climbing, climbing, working at
heights, underground works, and industrial
use and it does not exempt the user from
personal liability for the related risks.
Activities carried out at heights (either sports
or industrial) involve serious risks and danger
for the head. Injuries cannot be ruled out
completely. In order to guarantee the highest
level of safety during such activities, it is
necessary to use equipment in compliance
with the current regulations and to use it
properly. The following instructions for use
are important in order to ensure correct use.
However, they cannot replace experience,
personal liability and awareness of individual
users concerning the risks related to climbing,
mountain climbing, working at heights and
industrial work, such instructions do not
exempt from personal liability due to the
related risks. Use is only permitted to trained
and skilled people or under the supervision
of an expert. The producer denies liability for
improper and/or incorrect use of the product.
Liability and risk rest entirely with the user. In
the case of use in rescue or PPE operations,
it is highly recommended to observe national
regulations on the matter.
Warning
this product shall be used by trained skilled
persons only otherwise the user shall be
constantly supervised by said persons,
who shall guarantee for their safety, you
are personally responsible for knowing this
product, learning how to use it and all the
safety precautions involved. Before using this
equipment you must read and understand all
instructions for use, et specific training in
its proper use, become acquainted with its
capabilities and limitations, understand and
accept the risks involved. Failure to heed any
of these warnings may result in severe injury
or death.
Instructions for use - Adjustments
In order to assure a safe protection, this
helmet must be adjusted to fit the user’s head
dimensions. The helmet must be adjusted to
fit the head properly so that it does not rock
side to side or move when the chin strap is
locked and the slider is in the correct position
based on the head perimeter. The helmet will
only offer the highest level of protection if this
adjustment is done correctly. A perfect and
safe adjustment on the head is guaranteed
only if the chin strap is locked and tightened
and with a correct adjustment to the cranial
INSTRUCTIONS