Roche CoaguChek XS Pro, Operator'S Manual

Page: 103 / 156

Control Testing and Quality Control •
6
103
You hear a beep when you have applied enough control
solution (provided the beeper is enabled). The dropper
icon disappears and the test starts.
The result of the liquid quality control test is displayed. It
is automatically saved to memory.
The acceptable range of results for the liquid control is
displayed below the current result, along with Pass or Fail .
If a quality control test fails, an up arrow (too high) or
down arrow (too low) is displayed and flashes.
Note: The arrow (next to the result) refers to the INR
result only.
If you have selected to display INR and %Quick or INR
and seconds, the (up or down) arrow next to the result
refers only to the INR value.
The printer icon only appears if the printer function
is activated. Otherwise it is not displayed.
QC Test
09:15 am
04/19/2012
0.9 INR Fail:
110 %Q
04/19/2012 09:15 am
QC: 999
Code: 184
Op: Operator 1
Par: PT
Level: 1
(1.0 - 1.4 INR)
(53 - 99 %Q)
QC Test 09:15 am
04/19/2012
1.2 INR
78 %Q
04/19/2012 09:15 am
QC: 999
Code: 184
Op: Operator 1
Par: PT
Level: 1
(1.0 - 1.4 INR)
(53 - 99 %Q)
Pass:
QC Test
09:15 am
04/19/2012
QC: 999
Code: 184
Op: Operator 1
Par: PT
Level: 1