8
Your New System
1
Setting the Time and Date
1
Press and release
to turn the meter
on.
The flashing test
strip symbol
appears on the
display.
2
set-up
Press and
hold
until
set-up
appears on the
display. The hour
flashes.
Press or to
decrease or increase the hour.
3
set-up
Press to set the
hour and move to
the next field.
4
Repeat steps 2 and
3 to adjust each
field. Press and
hold
until the
flashing test strip
symbol appears.
Insert a test strip to perform a test.
NOTE
• The meter prompts you to set the
time and date the first time you turn
the meter on or if an error occurs.
• Press and hold at any time until
the flashing test strip symbol
appears to perform a test.
• The time and date on the meter
synchronises to the time and date on
the paired device each time the
meter sends data to the paired
device. See the chapter Wireless
Communication, Meter Pairing, and
Data Transfer.
81383_09241493001_09241493001_01.indd 8
81383_09241493001_09241493001_01.indd 8
10/13/2020 2:44:23 PM
10/13/2020 2:44:23 PM
