Roche ACCU-CHECK Active Page 59 Reference Manual Download

Page: 59 / 144

씰

Apply the drop of blood to the middle of the orange-coloured

pad. It is OK to touch this application area when applying blood,
but do not attempt to spread the blood.

씰

Gently push the test strip back into the test strip slot of your

Accu-Chek Active meter, until you feel it click into place.

씰

Your Accu-Chek Active meter beeps briefly to acknowledge

application of blood and to announce the start of testing.
Make sure you do not move the test strip during testing, or an
incorrect result will be obtained.

씰

The hourglass symbol indicates that testing is in progress.

man_04493168001_02_EnUK.indd 57

1/12/2006, 11:29:05 ðì

Summary of Contents for ACCU-CHECK Active

















































































































































Search results

Summary of Contents for ACCU-CHECK Active

Reviews:

Related manuals for ACCU-CHECK Active

Brands by name

Popular brands

Roche ACCU-CHECK Active, Reference Manual

Search results

Summary of Contents for ACCU-CHECK Active

Reviews:

Related manuals for ACCU-CHECK Active

Brands by name

Popular brands