ROCAM ATHENA PR, Instruction Manual

Page: 6 / 12

6
5. Cleaning and Maintenance
WARNING:
Before any cleaning operation unplug the device from the electrical system. Never
wash the appliance with water jets in order to prevent water seepage inside the
electrical components.
The manufacturer is not responsible of any structural damage caused by the use of
damaging substances.
The trolley must always stand horizontally and shall never be turned to prevent
damages on the compressor.
Clean the appliance at the end of the service.

The well has to be emptied from the condensation through the
drain cock (see image on the right).

Place a bucket under the drain cock and turn the lever, make
sure it is closed once the tank will be empty.

Once the well will be empty, it is recommended to dry it up with a
cloth or a sponge. The laminate parts can be cleaned with a
damp cloth- In case of stubborn stains, use a damp cloth with
some alcohol, do never use corrosive or abrasive detergents.

The plexiglass parts can be cleaned with a damp cloth- In case of
stubborn stains, use a damp cloth with some product compatible
with plexiglass, never use a corrosive detergents.

Hanex plane (only for “PR” models) has to be cleaned with a
damp cloth with some alcohol, do never use corrosive
detergents.
Drain cock
Condensation pan for “RV” fan-assisted models
At the end of each use and in any case before
moving the buffet, it is advisable to take out the
condensation tray located at the bottom of the buffet
and empty it to avoid water leaks and damages to
the laminate structure.