ROCAM ATHENA PR, Instruction Manual

Page: 2 / 12

2
1. Instruction warnings
User has to hold the whole instructions. User must store up this document in case of use. The
manufacturer is not responsible of any damage incurred due to the failure of improper use of this manual.
All measures in this manual are in mm.
2. Safety and Right Use Warnings
The Rocam Losi products meet the latest technological evolutions and current safety
guidelines. Buffet line
ATHENA
, object of this booklet, is designed to be in compliance
with directives and field laws, in order to guarantee a safe and reliable product.
Any other use will be considered inappropriate to the original destination. The producer is
not responsible of any damage caused by an improper use. Responsibility lies only on
user. A proper use also includes compliance with the instructions for use and installation
and any additional documentation as well as the conditions of inspection and maintenance.
3. Warranty
We thank you for purchasing a Rocam Losi product, designed and produced for a professional
environment. Due to commercial and construction requirements, the manufacturer reserves the right to
make changes in order to enhance the quality and use of product. Rocam Losi s.r.l., in compliance with
European Community legislation, grants its products for 24 months. This warranty does not include
electrical parts, labour and all replacements related to an improper use of the good. Any manipulation
carried out automatically excludes the liability of the manufacturer. The products or parts to be replaced
or repaired for unequivocal defects in workmanship and materials used must be in a “free port” at the
offices of the producer, who after a careful inspection, will repair or replace them. The repairs are carried
out exclusively at the headquarters of the manufacturer, and none cost incurred by the customer for
repairs will be refunded by the manufacturer unless explicitly agreed.
ANY MANIPULATION AUTOMATICALLY EXCLUDES THE MANUFACTURER’S LIABILITY AND THE
WARRANTY ON THIS PRODUCT
.
3.1 Unpacking
This item is packed and shipped assembled. The manufacturer declines every responsibility for
damages of someone or something caused by the failure to comply with the instructions of this manual.
Do not make any structural change to the trolley.
The elements composing the trolley (plastic, polyurethane foam, bubble wrap, Styrofoam,
cardboard and so on) must be kept away from children as potential sources of danger and
must be collected and disposed off separately in accordance with local regulations.
The manufacturer declines every responsibility of damage of someone or something caused
by the failure to comply with the instructions of this manual.
After the unpacking of the item from its packing, proceed by removing the adhesive plastic tape before
starting up the product. Any residual glue has to be removed carefully (do not use abrasive cleaners).
The device is designed to run on AC to the voltage specified on the technical data plate (located on the
bottom of the tank).
The grounding line is marked by the colours yellow/green and must not be interrupted.
The device is provided with a cable in accordance with the CE regulations and with a schuko plug (that
can be replaced, when necessary, with a different plug, suitable for the specified wattage and in
accordance to the current regulations and guidelines; when necessary, replace the provided cable with a
new one with the same features).