background image

User’s Manual

Installation guide

Guarantee card

Remote unit

Mounting Plate with 

Hardware kits

T-valve with Bidet Hose 

(60cm)

Parts list

Battery x4

4

English

Español

Deutsch

Italiano

Français

Português

Specification

Power Source

220-240V~, 50/60Hz

Maximum Power Consumption

1300W

Fr

ont and r

ear cleaning

Tap water pressure (connect cold to water)

0.1~0.7 PMa (1~7bar)

Rear spray volume

0.2~0.8 l/min

Front spray volume

0.2~0.8 l/min

Maximum heater capacity

1200W

Heating system

 Instant water heating

Water temperature

Off / 35 °C / 37 °C / 39°C 

Safety device

Thermal Fuse

Dryer

Warm dryer temperature

40~60 °C 

Maximum heater capacity

350W

Air dryer speed

12 m/s

Safety device

Thermal Fuse

Seat

Heated seat surface temperature

Off / 35˚C / 37˚C / 39˚ C 

Heater capacity  

40W 

Safety device

Thermal Fuse

Deodorizer

Active carbon, Volume 0.1m

3

/min

Night light

Led

Power saving

Length of power cord 

120cm

Product weight

3.7Kg (±0.3kg)

Above specifications has been measured under room temperature of 25°C, incoming water temperature between 15°C and 30°C 
and Water pressure of 0.2MPa. Incoming water temperature out of this range can cause unstable temperature of the water coming 
out through the nozzle.
The manufacturer reserves the right to change above specifications at any time without notice and without incurring obligations. 

Caution for mild burn

Please adjust the seat and water temperature at the lowest level if the product is used by :
1. Children, the old, patients
2. Person whose skin is easier to be allergic.
3. Person who takes medicine (sleeping pill, medicine for cold…, etc) which might cause drowsy or tiredness.
Please use lower temperature ( 35°C) in order to prevent mild burn occurred while using this product to contact same position of
skin for a long time, please turn off seat heater function.
Please refer to "Seat heater" of the manual for operation instruction.

Summary of Contents for MULTICLEAN PREMIUM A80400600
















Reviews: