参 考 2
Mount the toilet bowl as described in the Installation Manual (PAW-1109-W) included in the product package.
Mounting Toilet Bowl
1
Installation Procedure
Connecting Body to Toilet Bowl
4
Installation diagram
4. Connect the water supply hose.
(1) Insert a water supply connection hose
from the body into the water valve spout.
(2) Firmly secure the hose and the
spout with the body connection
clip. (Use the body connection clip
removed in step
)
(1) Connect the toilet bowl connectors (one black
connector for water valve; two white connectors
for drive unit) to the body connectors.
(3) Push the body all the way to the
rear.
(3) Engage the tips of the connection
clip to fit the clip, and check that the
clip is attached firmly.
Body
Connector
Toilet bowl
Attach the Anchor Nuts to the toilet bowl.
Attaching Anchor Nuts
2
5. Connect the body to the toilet bowl.
Anchor Nut
Mounting plate
Anchor Nut
Body connection clip
Anchor Nut
Anchor Nut
Click
Water valve spout
Water shutoff cap
* Will not be used
Body connection clip
* Will be used later
Water valve
①
②
Bend
Click
Water supply
connection hose
Body connection clip
Water supply
connection hose
1. Check that the water shutoff valve is closed.
2. Remove the body connection clip and the water shutoff cap.
Preparing to Connect Water
Supply Hose to Water Valve
3
Be sure to perform
depressurizing before
removing the body connection
clip and the water shutoff cap.
(See
in the Installation
Manual contained in the toilet
bowl package.)
Omission of depressurizing
will cause water to splash
when the body connection
clip and water shutoff cap are
moved.
Note 1
Toilet bowl connectors
Body connectors
2. Remove the top cover.
3. Mount the body on the toilet bowl.
Mount the body on the toilet bowl so that the slots on
the rear surface
of the body are
engaged with
the securing
tabs on both
sides of the
mounting plate.
Securing tabs
Slots
Rear surface of body
Engage slots (upper right
figure) with securing tabs
Water valve
Slots
Toilet bowl
Body
Push
(2) Stow the connectors in the left-
side space of the wafer valve.
Attach the clip firmly.
* Incorrect attachment will
cause water leakage.
Note 2
Attach the clip so that the
ends of the clips are engaged
and you hear a click.
* Incorrect attachment will
cause water leakage.
Note 4
Be careful not to damage the
O-ring.
* Water may leak if the O-ring
is broken or damaged.
Note 3
Reference 1
●
When removing the clip, hold
the clip with your fingers and
insert a flat-blade screwdriver
as shown in the figure and
push it downward.
Push
See Reference 1
Connector
Water valve
1. Check that the connector is pulled up.
* Otherwise, the body cannot be connected to the
toilet bowl.
Connector (white)
Wafer valve
See Note 1
See Note 2
See Note 3
See Note 4
