9
Continuous exposure to strong sunlight and UV rays may
change the cover color. The cover should also be protected
against any physical damage.
3.4. FROST PROTECTION
(
ANTIFROST SYSTEM / SMART WINTER
MODE)
Most important task of SPA electronic system is holding
temperature of water within the range between 15 to 40
0
C.
However electronic system has additional feature - winter
operation mode (Antifrost/Smart Winter mode) which pro-
tects piping against frozing.
PCB integrated temperature sensor continously controls
air temperature which surronds electronic system. If air
temperature decrease below 15
0
C electronic system starts
winter mode. In this mode system switches on every pump
for 1 minute (one by one). Frequency of pumps operations is
connected with surrounding temperature and is presented
in the table below. Water heater works independently of air
temperature sensor, it depends only of water temperature
sensor.
Temperature
0
C
Operating frequency (min)
12 < t ≤ 15
120
9 < t ≤ 12
60
6 < t ≤ 9
30
t ≤ 6
15
• Operation mode ANTIFROST system is marked by ICE symbol
on the LCD screen.
• Stand by mode doesn’t affect on ANTIFROST system ope-
rations.
• All these functions are not available until ICE symbol disap-
pered. It is possible to take a bath.
• If electronic system detects temperature below 15
0
C degrees
of the surrounding air then ANTIFROST systems starts after
15 minutes from last pump switch off.
• If during filtration mode ANTIFROST system starts, filtration
mode will be switch off.
3.5. WALLS
No special care is required since they have been designed for
outdoor use. After 3 or 4 years, you can give them a coat of
water-based varnish.
3.6. ACRYLIC PLATE
Special precautions must be taken in the cleaning and ma-
intenance of the spa.
- To clean the spa, do not use abrasive or aggressive products,
since they could damage the surface.
- If the surface of your spa shines, you can remove any sur-
face scratches. Use an emery cloth with water (No. 800) and
recover the initial shine with a solvent-free polish of the type
used for car paint.
- Do not use any other alcohol-base chemical product for cle-
aning plastics, such as the electronic panel. To remove scale,
use very diluted vinegar (acetic acid). Never use shop-bought
chemical products.
4. WOOD PANEL ASSEMBLY/REMOVAL
(VERSION WITH PANEL ONLY)
Summary of Contents for BROADWAY COMPACT
Page 1: ...1 User s Handbook BROADWAY COMPACT...
Page 11: ...11...
