22
operational modes appear on the liquid crystal display panel:
- Controls the system in the cooling mode.
(The word
is displayed on the panel
for 5 seconds).
- Controls the system in the heating mode.
(The word
is displayed on the panel
for 5 seconds).
- Controls the system in cooling or heating
according to requirements. (The word
is displayed on the panel for 5 seconds).
- Controls the system in the emergency heat-
ing mode (it is only active if the optional
accessory electrical resistance heater has
been installed).
- Disconnects the system.
a) Cooling
Press the button MODE repeatedly until the cooling
symbol
is displayed on the panel (at the same time the
word
is displayed for 5 seconds).
The cooling symbol continues to be displayed on the
panel.
After a few minutes have passed the cooling system will
start up, and the cooling symbol, visible on the display, will
start to flash.
b) Heating
Press the MODE button repeatedly until the heating
symbol is isplayed on the panel (at the same time the
word
is displayed for 5 seconds). The heating
symbol continues to be displayed on the panel.
After a few minutes have passed the heating system will
start up, and the heating symbol, visible on the display will
start to flash.
c) Automatic
Select a set temperature for the cooling mode and another
for the heating mode, as described in paragraphs a and b.
In this operational mode the set temperature for cooling
must be at least 1°C above the heating
,
Once the operational mode has been selected, continue
to select the set temperature by pressing button
or
button
, whether this be to select a higher or a lower
temperature. The set temperature is displayed together
with a small symbol which represents a thermometer,
which is displayed on the panel for 5 seconds. After the set
temperature has disappeared then the ambient tempera-
ture will again be displayed.
Once the operational mode has been selecte, select the
set temperature by pressing button
or button
,
whether this be to select a higher or a lower temperature.
The set temperature is displayed accompanied by a small
symbol which represents a thermometer, and remains
visible on the display panel for 5 seconds. Once the set
temperature will again be displayed.
SELECTED MODE
(DISPLAYED FOR 5 SECONDS)
AMBIENT TEMPERATURE
COOLING SYMBOL
(SELECTED MODE)
COOLING SYMBOL
(SELECTED MODE)
SET TEMPERATURE
(DISPLAYED FOR 5 SECONDS)
MODE SELECTED
(DISPLAYED FOR 5 SECONDS)
AMBIENT TEMPERATURE
HEATING SYMBOL
(MODE SELECTED)
SET TEMPERATURE
(DISPLAYED FOR 5 SECONDS)
HEATING SYMBOL
(SELECTED MODE)
