36
3.) Maximum power adjustment: re-enter
ECS menu “PR09 parameter 04” (you may
have to reenter this menu several times
as the program only lasts for 20 seconds)
Now adjust the screw with 2.5mm spanner
(picture-R) and make the value of CO
2
achieve
the required point (CO
2
%=9.2±0.2).
4.) Minimum power adjustment: enter ECS
menu and select Pr09 parameters 01, adjust
the screw (picture-A),and make the value
of CO
2
achieve the required point (CO
2
%=8.8±0.2). (you may have to reenter this
menu several times as the program only lasts
for 20 seconds)
5.) Due to the interactional effect, you should
recheck the maximum and minimum power
to ensure the CO
2
levels are still within range,
and adjust as necessary.