5
BLOWER IDENTIFICATION
Tipo
Type
N° di serie
S/N
Anno di costruzione
Manufacturing year
Gas convogliato
Conveied gas
Pressione assoluta di aspirazione P1
Absolute intake pressure
mbar
Temperatura di aspirazione
T1
Intake temperature
°C
Portata aspirata
Q1
Inlet capacity
m3/h
Pressione assoluta di mandata
P2
Discharge absolute pressure
mbar
Pressione differenziale
P2 – P1
Differential pressure
mbar
Temperatura di mandata
T2
Discharge temperature
°C
Velocità di rotazione del soffiatrore n
Blower speed
Rpm
Potenza assorbita
N
Absorbed power
Kw
Potenza del motore
Motor power
Kw
Velocità di rotazione del motore
Motor speed
Rpm
Rumore emesso
SPL
Noise
dB(A)
WARRANTY CONDITIONS
The blower, if not stated otherwise by the contract, is
guaranteed for 12 months of operation and in any case for a
maximum of 18 months after the delivery.
The warranty apply only if the contractual and administrative
norms have been observed and if the installation of the blower
and its use comply with the instructions of this manual.
The damaged or defective parts due to manufacturing faults will
be repaired or replaced free of charge.
The following are excluded from this warranty : all parts subject
to wear (air filter, bearings etc..), transport costs and the costs
of the intervention of our technicians for operational faults not
due to manufacturing defects.
The warranty excludes any responsibility for direct or indirect
damage to people and/or objects caused by improper use or
inadequate maintenance of the blower and is limited only to
manufacturing defects.
The warranty is considered void in the event of tampering or
changes (even small ones) and use of non-original spare
parts.
www.fraserwoods.ca
