manualshive.com logo in svg

Robur Direct Digital Controller, Installation, Use And Programming Manual

Share
Download
Robur Direct Digital Controller Installation, Use And Programming Manual Download Page 19

Direct Digital Controller 

 

 

Direct Digital Controller fw 4.013 – Ed. 01/2013      

 

 

 

 

 

 

 

      

17 

 

  

2.7 ERROR 

RESET 

This option allows the user to reset the anomalies present in the unit selected (with the exception of flame 
control unit arrest). 
To carry out an error reset, follow the instructions below: 
 

1 -  Select 

 from the initial screen to access the alerts menu. 

2 -  Select the plant in which the events occurred: 

 for the cooling plant, 

 for the heating plant, or 

 if the DDC is configured to manage a 2 line hot/cold plant. 

The 

 symbol that appears next to a plant icon indicates that anomalies are present in that plant. 

3 -  Select   to view the screen that relates to the unit where the error has occurred. 

4 -  Select i to access to the “INFORMATION MENU” related to the selected unit. 

5 -  Select 

 to access the MACHINE MANAGEMENT menu directly. 

6 -  Position the cursor on 

 and press the knob to carry out an error reset. 

7 -  Wait for the operation to be performed. If the operation is successful, the message “OK” appears on the 

display. 

8 -  To exit, select 

. 

 

 

 

 

 

 

 

An error reset does not reset the flame control unit. To reset the flame control unit is necessary to 

move with the cursor on 

 and press the knob. 

Error resets for which the message “Contact Technical Assistance” appears must only be carried 
out by qualified personnel  

It is not possible to reset errors on third party machines.  

WARNING  

NOTE  

NOTE  

Summary of Contents for Direct Digital Controller





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands