Features and technical data
10
1
1.4
CONTROLS
1.4.1
Control device
The operation of the appliance is controlled by a remote
control, available in the following versions:
1. ECO basic remote control (versions AD14/AD20 ECO)
2. EVO advanced remote control (versions AD14/AD20
EVO)
3. OCDS010/OCDS011 centralised control combined
with OCDS009 network board (AD14/AD20 SC
versions)
4. Centralised control with ODSP035 router (one AD14/
AD20 ECO or EVO and up to 4 AD14/AD20 SC)
1.4.2
ECO basic remote control
Figure 1.4
ECO basic remote control
The ECO basic remote control is the basic control system
for AD evaporative coolers.
The features of the ECO basic remote control are:
▶
Turning the appliance on and off.
▶
Cooling/ventilation selection.
▶
Ventilation speed selection (3 levels).
▶
Diagnostics of any faults.
All settings must be made manually, as there is no time
programming for this control.
For further information refer to the instruction
sheet supplied with the ECO remote control.
1.4.3
EVO advanced remote control
Figure 1.5
EVO advanced remote control
The EVO advanced remote control is the advanced con-
trol system for AD evaporative coolers, which includes a
humidity and temperature probe already installed and
connected to the control.
The features of the EVO advanced remote control are:
▶
Automatic/manual operation selection.
▶
Cooling/ventilation selection.
▶
Automatic or manual selection of the ventilation
speed (3 levels).
▶
Room temperature detection by integrated thermo-
stat.
▶
Ambient humidity detection by integrated humidistat.
▶
Automatic operation based on the setpoint.
▶
Daily programming of the operating time schedule.
▶
Diagnostics of any faults.
The EVO control can guarantee automatic regulation of
the cooler, thanks to the temperature and humidity probe,
being able to adjust the fan speed accordingly on the 3
available levels. With the EVO control, it is also possible to
set a daily time program, being able to set the cooling or
fan-only mode.
For further information refer to the instruction
sheet supplied with the EVO remote control.
1.4.4
OCDS010/OCDS011 centralised control
Figure 1.6
OCDS009 network board
Figure 1.7
OCDS010/OCDS011 centralised control
The OCDS010/OCDS011 centralised control allows cen-
tralised management of systems consisting of several SC
version cooling units (up to a maximum of 30).
The functions of the centralised control are:
▶
Display and setting of date and time on network
boards.
▶
Display of temperature and humidity measured by
network boards.
▶
Display and change of temperature and relative hu-
midity setpoints for each network board.
▶
Display and change network device parameters (net-
work boards and coolers).
▶
Switching on/off of each individual network board.
